Minibike Origami B1

CLICK TO ENLARGE

The Minibike Origami B1 is designed and built for use on a paved closed circuit track. The track should be clean and without obstacles of any kind. Qualified adults and younger persons can drive the minibike. Children can drive the minibike only under the supervision of a responsible adult person. The minibike is constructed especially for racing competitions on special racing tracks.

The minibike uses a single-cylinder two-stroke, Gasoline combustion engine, and has an air filter and exhaust silencer. Transfer of power to the rear wheel is through a drive chain. The the overall drive ratio to the rear wheel can be changed by the replacement of chain sprockets. The front and rear wheel is equipped with disk brakes. The rear brake is controlled with the left lever and the front brake is controlled with the right lever on the handlebars.

 

$2,799.00

Includes Tax & Shipping In the U.S.

Basic Technical Data
Engine

Cycle Two-Stroke
Number Of Cylinders 1
Size, Capacity 39,8 ccm
Engine Cooling System Liquid Cooled
Power Output 14,5 HP at 12 300 rpm
Turning moment 8,1 Nm at 12 000 rpm
Carburetor PHVA 17,5 Dell' Orto
  Ignition Electronic
  Starting Hand Pull Type, Manual
  Clutch Centrifugal Automatic
Frame
Enhanced Trellis Supporting Structure Made of Light Alloys
Lining Four Parted
Brakes
Front Wheel Mechanical Disc Brakes
Rear Wheel Mechanical Disc Brakes
Wheels
Front FRONT OF LIGHT ALLOY 2,1" x 6,5"
Rear REAR OF LIGHT ALLOY 2,3" x 6,5"
Tires
Front

Tubeless: 90/65 - 6,5"

Rear

Tubeless: 110/50 - 6,5" or 90/65 - 6,5"

Fuel
Gasoline Mixture Mixture of Gasoline 92 Octane or Higher + 2T Synthetic Oil
Mixing Ratio (After Break In Period)
50: 1
Tank Capacity 1,7 Liter (0,44 US Gallon)
Speed
  With The
Installed Ratio

up to 50mph(80km/h)

Basic Dimensions
  Unloaded Weight (66lbs.) 30 Kg
  Carrying Capacity (240lbs) 110 Kg
  Length

1,100 mm

  Width 560 mm
  Height 550 mm
  Colors Red, Black, White, Yellow